LBL Lighting Tulip WCF User Manual
Installation Instructions for
980TULIPWCF
Tulip Compact Fluorescent Wall
Wall Sconces
GENERAL PRODUCT INFORMATION:
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for indoor dry locations only.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
PW3783_13Q_
1.4
Install the Fixture
1A
#8-32 SCREW
1
CROSSBAR
ASSEMBLY
1
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
1
ELECTRICAL BOX HOLE
1B
Feed the fixture wires through the mounting plate side hole.
2
Make sure that the crossbar is grounded in accordance with
3
local electrical codes.
Connect the fixture white wire to the neutral power line wire
4
with a wire nut.
MOUNTING PLATE
FIXTURE WIRES
4
3
2
5
5
Connect the fixture black wire to the hot power line wire with
a wire nut.
1
1C
2B
WASHER
NUT
7
Place all wires and wire nut connections properly inside the
6
6
EXPOSED
THREADED
NIPPLE
MOUNTING
PLATE
electrical box.
7
Slide the mounting plate center hole onto the exposed
threaded nipple. Secure the mounting plate to threaded nipple
with both washer and nut.
Install the Lamp & Shade
2A
GLASS
SHADE
2
2
Place the glass shade onto the mounting plate. Align the glass
2
MOUNTING
PLATE
shade holes with the mounting plate holes. Tighten the thumb
screws to secure the glass shade in place.
NOTE: Do not over tighten the thumb screws which may
cause the glass shade to break.
THUMB
SCREW
1
SOCKET
For The Fixtures With Electronic Ballast,
Use MAX 13 Watt Type Quad Tube G24q-1
Base 4-PIN Compact Fluorescent Lamp.
For The Fixtures With Magnetic Ballast,
Use MAX 13 Watt Type Quad Tube
GX23-2 Base Compact Fluorescent Lamp.
1
Push the lamp pins completely into the socket holes.
LAMP
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2008 LBL Lighting. All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
2
Loading...