LBL Lighting Top II W CF User Manual
Installation Instructions for
980TOPIIWCF
Top Wall II (Compact Fluorescent)
Wall
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
PW240OP_13QHE
1
1.3
Install the Fixture
1A 1B
#8-32 SCREW
ELECTRICAL
1
1
Mount the crossbar to the electrical box holes with the two
#8-32 screws provided.
1
CROSSBAR
BOX HOLE
2
3
3
2
4
BALLAST
In accordance with local electrical codes, make sure that the
crossbar is grounded.
Connect the ballast white wire to the neutral power line wire
with a wire nut.
4
Connect the ballast black wire to the hot power line wire with
a wire nut.
1
1C
CANOPY
6
#8-32 SCREW
7
5
Place the ballast properly inside the canopy.
6
Place all wires and wire nut connections properly inside the
electrical box.
7
Place the fixture canopy onto the crossbar assembly. Level the
fixture vertically; replace and tighten the two #8-32 Phillips
head screws.
7
7
2B
2
2
Remove the three thumb screw.
2C
GLASS SHADE
2
THUMB SCREW
2
1
Install the Lamp & Shade
2A
LAMP
1
1
LAMP PIN
SOCKET
3
BRACKET
3
Align the glass holes with the bracket holes. Replace and
3
THUMB SCREW
3
1
tighten the three thumb screws to secure the glass shade in
place.
NOTE:To replace the lamp:
- Turn the power to the fixture off.
- While supporting the glass shade, remove the three
thumb screws.
- Remove the old lamp.
- Follow 1 through 3 on this page.
Use WattType Quad TubeMAX 13
G24Q-1 Base Compact Fluorescent Lamp.
1
Push the lamp pins completely into the socket holes.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
2
A Generation Brands Company
Loading...