LBL Lighting Tessa User Manual
Installation Instructions for
980TESSAW
Tessa Wall
Wall
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURNTHE POWER TO THE
ELECTRICAL BOX OFF.
WS757_
1.0
Install the Mounting Plate
1A 1B
ALLEN WRENCH
MOUNTING
PLATE
1
1
FIXTURE
SCREW
#8-32 SCREW
3
3
ELECTRICAL BOX
#8-32 SCREW
1
1
With the Allen wrench provided, remove the two fixture
screws.
Remove the mounting plate from the back of the
2
2
fixture.
23
Install the mounting plate onto the electrical box with
the two #8-32 screws provided.
1
Install the Fixture
Install the Lamp
2A
2
3
1
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
2
Connect the white fixture wire to the neutral power line
wire with a wire nut.
3
Connect the black fixture wire to the hot power line
wire with a wire nut.
3A
1
LAMP
1
SOCKET
1
CAUTION: To reduce the risk of a burn or electric
shock during lamping and re-lamping, disconnect
the power to the fixture.
Use S-21 Squirrel CageMAX 60 Watt
medium base lamp or other style
60 Watt medium base lamp.
2B
ALLEN WRENCH
4
4
1
4
Remount the fixture onto the mounting plate and
secure it tightly with the two fixture screws using the
allen wrench.
FIXTURE
SCREW
1
Screw the lamp into the socket.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2013 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
2
Loading...