LBL Lighting Teardrop WCF User Manual

Installation Instructions for

980TEARDWCF

Tear Drop (Compact Fluorescent)

Wall

GP I :ENERAL RODUCT NFORMATION

This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.

This product is suitable for damp locations.

CAUTION - RISK OF FIRE

This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.

Use minimum 90°c supply conductors.

PW4601_SC13Q_

1.5

Install the Fixture

1A 1B

#8-32 SCREW

1

CROSSBAR
ASSEMBLY

Mount the crossbar assembly to the electrical box holes with

1

the two #8-32 screws provided.

1

ELECTRICAL BOX HOLE

FIXTURE
WIRES

2

3

MOUNTING PLATE

4

3

5

2

5

Feed the fixture wires through the mounting plate side hole.

Make sure that the crossbar is grounded in accordance with
local electrical codes.

4

Connect the fixture white wire to the neutral power line wire
with a wire nut.

5

Connect the fixture black wire to the hot power line wire with
a wire nut.

1

1C

2B

MOUNTING PLATE

2 2

7

CAP

6

Place all wires and wire nut connections properly inside the

EXPOSED THREADED
NIPPLE

electrical box.

7

Slide the mounting plate center hole onto the exposed
threaded nipple. Secure the mounting plate in place by
tightening the cap to threaded nipple.

Install the Lamps & Shade

2A

MOUNTING
BRACKET

GLASS
SHADE

2

Place the glass shade onto the mounting plate. Align the glass

THUMB
SCREW

MOUNTING
PLATE

shade holes with the mounting plate holes. Tighten the thumb
screws to secure the glass shade in place.

NOTE:Do not over tighten the thumb screws which may

cause the glass shade to break.

LAMP

LAMP PIN

SOCKET

Use WattsType Quad G24q-1MAX 13
Base Compact Fluorescent Lamp.

1

Push the lamp pins completely into the socket holes.

1

SAVETHESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

A Generation Brands Company

2