LBL Lighting Teardrop W User Manual
Installation Instructions for
980TEARDW
Tear Drop Wall
Wall
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
HW4601_SC2G60
1.8
Install the Fixture
1A 1B
#8-32 SCREW
1
CROSSBAR
ASSEMBLY
1
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
1
ELECTRICAL BOX HOLE
2
3
4
MOUNTING PLATE
GROUNDWIRE SCREW
4
3
2
FIXTURE
WIRES
5
Feed the fixture wires through the mounting plate side hole.
Connect the crossbar to a suitable ground in accordance with
local electrical codes.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
5
Connect the fixture black wire to the hot power line wire with
a wire nut.
1
1C
MOUNTING
PLATE
6
Place all wires and wire nut connections properly inside the
7
electrical box.
7
Slide the mounting plate center hole onto the exposed
threaded nipple. Secure the mounting plate in place by
tightening the cap to threaded nipple.
CAP
CROSSBAR
EXPOSED THREADED
NIPPLE
Install the Lamp and Shade
2A
LAMP
2B
2 2
MOUNTING
BRACKET
GLASS
SHADE
2
Place the glass shade onto the mounting plate. Align the glass
shade holes with the mounting plate holes. Tighten the thumb
screws to secure the glass shade in place.
THUMB
SCREW
MOUNTING
PLATE
1
SOCKET
NOTE:Use only your fingers and a soft cloth to install
the lamp.
Use 120 Volt, WattType T4,MAX 60
G9 Base, Bi-Pin Halogen Lamp.
1
Push the lamp pins completely into the socket holes.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
2
Loading...