LBL Lighting Taitu WCF User Manual
Installation Instructions for
980TAITUWCF
Taitu Compact Fluorescent
Wall
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
PWAP19OCSC13Q
1.4
Install the Fixture
1A 1B
#8-32 SCREW
1
CROSSBAR
ASSEMBLY
ELECTRICAL BOX HOLE
1
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
1
BALLAST
2
3
4
5
MOUNTING PLATE
4
2
5
Feed the fixture wires through the mounting plate side hole.
Make sure that the crossbar is grounded in accordance with
local electrical codes.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire with
a wire nut.
1
1C
MOUNTING
PLATE
NUT
2B
2
7
2
THUMB
SCREW
WASHER
6
Place all wires and wire nut connections properly inside the
7
EXPOSED THREADED
NIPPLE
electrical box.
7
Slide the mounting plate center hole onto the exposed
threaded nipple. Secure the mounting plate to the threaded
nipple with lock washer and nut.
Install the Lamp & Shade
2A
LAMP
MOUNTING
PLATE
GLASS
SHADE
2
Place the glass shade onto the mounting plate. Align the glass
shade holes with the mounting plate holes. Tighten the thumb
screws to secure the glass shade in place.
NOTE:Do not over tighten the thumb screws which may
cause the glass shade to break.
1
Use WattType Quad Tube G24q-1MAX 13
Base 4-PIN Compact Fluorescent Lamp.
1
Push the lamp pins completely into the socket holes.
4
PIN
SOCKET
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
2
A Generation Brands Company
Loading...