LBL Lighting Superdelta Tondo Visa User Manual
Installation Instructions for
980SDELTVO
Superdelta Oval
Outdoor
GP I :ENERAL RODUCT NFORMATION
This product is suitable for wet locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
170_, 171_
1.0
Install the Fixture
NIPPLE
1
POWER LINE
WIRE
1
Feed the power line wires through the crossbar nipple.
1B1A
NIPPLE
#8-32 SCREW
2
2
Attach the crossbar to the electrical box using two #8-32
screws provided.
2
3
CROSSBAR
1
1C
SCREW SHADE
1E
WASHERNUT NIPPLE
3
3
3
Remove all the screws from the front of the fixture.
4
Lift the shade off of the fixture.
1D
FIXTURE BASE
3
7
3
7
7
Make sure the fixture is level, and secure the fixture to the
nipple with a lock washer and nut.
1F
FIXTURE BASE
8
5
SCREW
5
Remove the two screws on the reflector.
6
Lift the reflector out of the fixture base.
REFLECTOR
9
5
REFLECTOR
8
Connect the neutral power line wire to the white fixture wire
with a wire nut.
9
Connect the hot power line wire to the black fixture wire with
a wire nut.
10
Connect the fixture to a suitable ground according to local
electrical codes.
11
Reattach the reflector to the fixture base.
2
Loading...