LBL Lighting Superdelta Tondo CF User Manual
Installation Instructions for
980SDELTVOCF
Superdelta Oval (Compact Fluorescent)
Outdoor
GP I :ENERAL RODUCT NFORMATION
This product is suitable for wet locations.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
175_HE
1.0
Install the Fixture
NIPPLE
1
POWER LINE
WIRE
1
Feed the power line wires through the crossbar nipple.
1B1A
NIPPLE
#8-32 SCREW
2
2
Attach the crossbar to the electrical box using two #8-32
screws provided.
2
3
CROSSBAR
1
1C
SCREW SHADE
1E
WASHERNUT NIPPLE
3
3
3
Remove all the screws from the front of the fixture.
4
Lift the shade off of the fixture.
1D
FIXTURE BASE
3
7
3
7
7
Make sure the fixture base is level, and secure it to the nipple
with a lock washer and nut.
1F
FIXTURE BASE
8
5
SCREW
Remove the two screws on the reflector.
5
Lift the reflector out of the fixture base.
6
REFLECTOR
9
5
REFLECTOR
8
Connect the neutral power line wire to the white fixture wire
with a wire nut.
Connect the hot power line wire to the black fixture wire with
9
a wire nut.
10
Connect the fixture to a suitable ground according to local
electrical codes.
Reattach the reflector to the fixture base.
11
2
Loading...