LBL Lighting SOMEDAY GP User Manual
Installation Instructions for
980SOMDGP
Someday Grande Pendant
Suspension
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
LP7 _50
1.0
Assemble the Fixture
1A
SOCKET
LAMP
1B
SHADE
FIXTURE FRAME
Use 120 voltMAX 75 Watt
Type A19 Medium Base Lamp.
1
Screw the new lamp into the socket.
2
Feed the fixture cord through the fixture frame until the
stem rests on the frame.
3
Slip the cord through the glass shade and gently lower
the glass shade onto the fixture frame.
1
Replacing the Lamp
2A
SHADE
ASSEMBLY
SOCKET
LAMP
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Use 120 voltMAX 75 Watt
Type A19 Medium Base Lamp.
1
Gently lift the shade assembly up to expose the socket.
2
Unscrew the old lamp, then screw in the new lamp
into the socket.
3
Gently lower the shade assembly until it rests on the
stem.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2013 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
2
A Generation Brands Company
Loading...