LBL Lighting Rhythm P User Manual

Installation Instructions for

980RYTHP

Rhythm Pendant

Suspension

GENERAL PRODUCT INFORMATION:

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent dimmer.

CAUTION - RISK OF FIRE

This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.

LP761_

1.0

Assemble the Fixture

1A

SOCKET

LAMP

MOUNTING RODMOUNTING ROD

GLASS
SHADE

Use MAX 120 volt 75 Watt
Type A19 Medium Base Lamp.

1

Screw the new lamp into the socket.

21B2

Place the hardware inside the glass shade and install the
three mounting rods by screwing them in completely.

1

Replacing the Lamp

2A

GLASS SHADE

SOCKET

LAMP

CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.

Use MAX 120 volt 75 Watt
Type A19 Medium Base Lamp.

1

Reach inside the glass shade and unscrew the old
lamp, then screw in the new lamp into the socket.

SAVE THESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2013 LBL Lighting. All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

2

A Generation Brands Company