LBL Lighting Presidio WCF3 User Manual
Installation Instructions for
980PRESIWCF3
Presidio 2x13W Compact Fluorescent
Wall
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
PW614_213_
1.3
Install the Fixture
1A
#8-32 SCREW
1
CROSSBAR
ASSEMBLY
1
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
1
ELECTRICAL BOX HOLE
1B
MOUNTING PLATE
3
4
2
In accordance with local electrical codes, make sure that the
crossbar assembly is grounded.
2
3
Connect the fixture white wire to the neutral power line wire
with a wire nut.
4
Connect the fixture black wire to the hot power line wire with
a wire nut.
1
Install the Lamp & Shade
1C 2A
LOCK
WASHER
6
NUT
1
7
THREADED
NIPPLE
5
Place all wires and wire nut connections properly inside the
electrical box.
Level the mounting plate vertically and slide the center hole
6
completely onto the exposed threaded nipple.
7
Secure the mounting plate to the threaded nipple with lock
washer and nut.
MOUNTING
PLATE
1
SOCKET
For The FixturesWith Magnetic Ballast,
MAX 13
Use WattTypeTwinTube
GX23 Base Compact Fluorescent Lamp With Each Socket.
For The Fixtures With Electronic Ballast,
MAX 13
Use WattType QuadTube G24q-1
Base Compact Fluorescent Lamp With Each Socket.
1
Install the lamp by pushing the lamp pins completely into the
socket holes.
LAMP
SOCKET
PIN
2
Loading...