LBL Lighting Pier 60 Large User Manual
Installation Instructions for
Pier 60, Pier 60 Medium, Pier 60 Large Outdoor
Outdoor
GP I :ENERAL RODUCT NFORMATION
This product is suitable for wet locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
980PIER60O
LW639_LEDW
OD826_LEDW
OD826_LEDW
1.1
Install the Fixture
1A 1B
MOUNTING
PLATE
1
1
SET SCREW
ALLEN WRENCH
#8-32 SCREW
3
3
MOUNTING
PLATE
1
With the Allen wrench provided, back out (do not fully
remove) the set screws at the base of the fixture.
2
Remove the mounting plate from the back of the
fixture.
Attach the mounting plate to the electrical box using
3
the two #8-32 screws provided.
1
1C
1D
SCREW
ANCHOR
ANCHOR
4
Verify that the mounting plate is level before continuing.
5
Line up an anchor tip with the center a mounting plate
hole, and push the anchor into the wall up to the
threads.
6
6
Screw the anchors in the rest of the way with a Phillipshead screwdriver.
WASHER
WASHER
SCREW
68
Slide a #8 screw through a washer and screw it into an
anchor.
69
Repeat for the other anchor(s) to secure the mounting
plate to the wall.
Repeat steps 5-6 for the other anchor(s).
67
NOTE: Pier 60 Large has 6 anchors to further support
the fixture.
1
3
4
5 6
2
2
Loading...