LBL Lighting Omni w Cover Small CF User Manual
Installation Instructions for
980OMNISWCF
Small Omni (Compact Fluorescent)
Wall
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Install the Fixture
CAUTION - RISK OF FIRE
PW559
1.2
1A
NUT
1
Assemble the crossbar by screwing the crossbar nipple to the
cross bar and secure it by tightening the nut.
CROSSBAR
NIPPLE
CROSSBAR
ASSEMBLY
1B
#8-32 SCREW
2
2
CROSSBAR
ASSEMBLY
2
1C
MOUNTING PLATE
5
4
6
3
Feed the fixture wires through the mounting plate side hole.
4
Connect the ground wire to a suitable ground in accordance
with local electrical codes.
5
Connect the white wire to the neutral power line wire.
6
Connect the black wire to the hot power line wire.
ELECTRICAL BOX HOLE
2
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
1
LOCK
WASHER
NUT
1E1D
ANCHOR
WASHER
SCREW
THREADED
NIPPLE
7
Place all wires and wire nut connections properly inside the
electrical box.
8
Slide the mounting plate onto the threaded nipple. Secure the
mounting plate by tightening the cap to the nipple.
9
Line up the anchor with the center of the mounting plate hole
and push the anchor into the wall up to the threads.
10
Screw the anchor the rest of the way in with a screwdriver.
Secure the mounting plate to the anchor with the screw and
11
washer provided.
2
Loading...