Installation Instructions for
980OMNIMWCF
Medium Omni (Compact Fluorescent)
Wall
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
PW561
1.1
Install the Fixture
1A
NUT
1
Assemble the crossbar by screwing the crossbar nipple to the
cross bar and secure it by tightening the nut.
CROSSBAR
NIPPLE
1B
#8-32 SCREW
CROSSBAR
ASSEMBLY
2
CROSSBAR
ASSEMBLY
2
1C
MOUNTING PLATE
5
6
3
Feed the fixture wires through the mounting plate side hole.
ELECTRICAL BOX HOLE
2
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
4
Connect the ground wire to a suitable ground in accordance
with local electrical codes.
5
Connect the white wire to the neutral power line wire.
6
Connect the black wire to the hot power line wire.
1
1D
LOCK
WASHER
NUT
1E
SCREW
WASHER
ANCHOR
THREADED
NIPPLE
7
Place all wires and wire nut connections properly inside the
electrical box.
8
Mount the housing to the crossbar nipple with the nut and lock
washer provided.
9
Line up the anchor with the center of the mounting plate hole
and push the anchor into the wall up to the threads.
10
Screw the anchor the rest of the way in with a screwdriver.
11
Secure the mounting plate to the anchor with the screw and
washer provided.
2
Install the Lamp and Shade
LAMP
SOCKET
2B2A
ALLEN WRENCH
SUPPORT ARM
5
4
SHADE
Use Type Twin Tube T5,MAX 24 Watt
2G11 Base Compact Fluorescent Lamp.
1
Push the lamp base into the socket.
3
SUPPORT ARM
2
Use the Allen wrench to remove the upper shade support arm.
3
Place the shade into the slot in the lower shade support arm.
4
Line up the slot in the upper shade support arm with the top
of the shade.
5
Use the Allen wrench to attach the shade support arm to the
top of the fixture.
3
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
4
Loading...