LBL Lighting Nikko Installation Instructions Manual

Installation Instructions for

980NIKKO

Nikko

Outdoor

GENERAL PRODUCT INFORMATION:

This product is suitable for wet locations.

This product can be dimmed with a standard incandescent dimmer.

This instruction shows a typical installation.

CAUTION - RISK OF FIRE

This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and DISCONNECT POWERTO
THE ELECTRICAL BOX.

147_, 159_

1.0

Install the Fixture

1A

NIPPLE

1

POWER LINE

WIRE

1

Feed the power line wires through the crossbar nipple.

1B

NIPPLE

#8-32 SCREW

2

2

Attach the crossbar to the electrical box using two #8-32
screws provided.

2

3

CROSSBAR

1

1C

SCREWCOVER

1E

3

3

3

Remove all the screws from the front of the fixture.

Lift the cover off of the fixture.

4

1D

FIXTURE BASE

3

7

WASHERNUT NIPPLE

3

Make sure the fixture base is level, and secure it to the nipple

7

with a lock washer and nut.

1F

8

9

5

SCREW

Remove the screws on the reflector.

5

Lift the reflector out of the fixture base.

6

REFLECTOR

5

Connect the hot power line wire to the black socket wire with

8

a wire nut.

Connect the neutral power line wire to the white socket wire

9

with a wire nut.

Connect the fixture to a suitable ground according to local

10

electrical codes.

11

Reattach the reflector to the fixture base.

2