LBL Lighting Monty WCF User Manual

Installation Instructions for

980MONTYWCF

Monty Wall (Compact Fluorescent)

Wall

GP I :ENERAL RODUCT NFORMATION

This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.

This product is suitable for damp locations.

CAUTION - RISK OF FIRE

This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.

Use minimum 90°c supply conductors.

PW936_SC13Q

1.5

Install the Fixture

1A

#8-32 SCREW

CROSSBAR
ASSEMBLY

1

Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.

1 1

ELECTRICAL BOX HOLE

1B

FIXTURE WIRES

2

Feed the fixture wires through the mounting plate side hole.

3

Make sure that the crossbar is grounded in accordance with
local electrical codes.

4

Connect the fixture white wire to the neutral power line wire
with a wire nut.

MOUNTING PLATE

2

2

BALLAST

4

3

5

5

Connect the fixture black wire to the hot power line wire
with a wire nut.

1

1C

2B

MOUNTING
PLATE

7

CAP

2

6

Place all wires and wire nut connections properly inside the

EXPOSED THREADED
NIPPLE

electrical box.

7

Slide the mounting plate center hole onto the exposed
threaded nipple. Secure the mounting plate in place by
tightening the cap to threaded nipple.

Install the Lamp & Shade

GLASS
SHADE

2

2

Place the glass shade onto the mounting plate. Align the glass

2

MOUNTING
PLATE

shade holes with the mounting plate holes. Tighten the thumb
screws to secure the glass shade in place.

NOTE:Do not over tighten the thumb screws which may

cause the glass shade to break.

THUMB
SCREW

2A

Use WattType QuadTubeMAX 13
GX24Q-1 Base Compact Fluorescent Lamp.

1

Push the lamp completely into the socket holes.

LAMP

SOCKET

SAVETHESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

A Generation Brands Company

2