LBL Lighting Monty W User Manual

Installation Instructions for
980MONTYW
Monty Wall
Wall
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
CAUTION - RISK OF FIRE
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
HW936_SC2G60
1.9
Install the Fixture
1A
#8-32 SCREW
CROSSBAR ASSEMBLY
1
Mount the crossbar assembly to the electrical box holes with the two #8-32 screws provided.
1 1
ELECTRICAL BOX HOLE
1B
2
Feed the fixture wires through the mounting plate side hole.
3
Connect the crossbar to a suitable ground in accordance with local electrical codes.
4
Connect the fixture white wire to the neutral power line wire with a wire nut.
MOUNTING PLATE
GROUNDWIRE SCREW
4
3
2
5
FIXTURE WIRES
5
Connect the fixture black wire to the hot power line wire with a wire nut.
1
1C
2B
MOUNTING PLATE
7
6
Place all wires and wire nut connections properly inside the
CAP
EXPOSED THREADED NIPPLE
electrical box.
Slide the mounting plate center hole onto the exposed
7
threaded nipple. Secure the mounting plate in place by tightening the cap to threaded nipple.
Install the Lamp & Shade
2A
CROSSBAR
2 2
MOUNTING PLATE
GLASS SHADE
2
Place the glass shade onto the mounting plate. Align the glass shade holes with the mounting plate holes. Tighten the thumb screws to secure the glass shade in place.
NOTE:Do not over tighten the thumb screws which may
cause the glass shade to break.
THUMB SCREW
SOCKET
NOTE:Use only your fingers and a soft cloth to install
the lamp.
Use 120 Volt, WattTypeT4,MAX 60 G9 Base, Bi-Pin Halogen Lamp.
1
Push the lamp pins completely into the socket holes.
LAMP
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a registered trademark of LBL Lighting. LBL Lighting reserves the right to change specifications for product improvements without notification.
A Generation Brands Company
2
Loading...