LBL Lighting Monty SPCF User Manual

Installation Instructions for

980MONTYSPCF

Monty (Compact Fluorescent)

Suspension

GP I :ENERAL RODUCT NFORMATION

This product is suitable for dry locations only.

This product can mount to either a 4" square
electrical box with round plaster ring or an
octagon electrical box.

CAUTION - RISK OF FIRE

This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.

Use minimum 90°c supply conductors.

PF935_C27GU

1.1

Install the Lamp

1A

1B

GLASS SHADE

1B

3

2

CONICAL CONNECTOR

SOCKET

LAMP

CAUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.

Carefully lift up glass shade up to expose the socket.

1

1

Use Volt, GU24 BaseWattMAX 27120
Self-Ballasted Spiral Compact Fluorescent Lamp.

2

Screw the lamp completely into the socket.

3

Carefully lower the glass shade onto the conical connector.

1

SAVE THESE INSTRUCTIONS!

Statement of Warranty

LBL Lighting warrants all products manufactured to
be free from defects in material and workmanship
under normal use for 3 years after the date of
original purchase. This warranty only applies when
components, including power supplies, have been
provided by LBL Lighting.
Upon confirmation of a defect or failure, at our
discretion we will repair or replace the item or will
refund your purchase price if repair or replacement is
not possible or practical. Our warranty covers only
the product itself; we will assume no liability for
labor costs, installation costs, or other losses.

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

A Generation Brands Company

2