LBL Lighting Monty SP User Manual

Installation Instructions for

980MONTYSP

Monty

Suspension

GP I :ENERAL RODUCT NFORMATION

This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.

This product is suitable for dry locations only.

This product can be dimmed with a standard incandescent dimmer.

CAUTION - RISK OF FIRE

This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.

Use minimum 90°c supply conductors.

LF935_SC2D100

1.2

Install the lamp

1A 1B

GLASS SHADE

3

2

CONICAL CONNECTOR

SOCKET

LAMP

CAUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.

1 2

Carefully lift up glass shade up to expose the socket.

1

Use Volt, WattType A19MAX 100120
Medium Base Lamp.

Screw the lamp completely into the socket.

3

Carefully lower the glass shade onto the conical connector.

SAVE THESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

2

A Generation Brands Company