LBL Lighting Mono-Tel User Manual

Installation Instructions for

980WMARCTEL

Mono-Arc and Mono-Tel

Wall Monorail

GP I :ENERAL RODUCT NFORMATION

This product is suitable for indoor dry locations only.

This product must be used with LBL LightingWall MonoRail system
only.

HPARC_MRL, HPTEL_MRL

1.0

1A

LAMP PIN

CAUTION:To reduce the risk of a burn or electric
shock during relamping, disconnect the power to the
fixture.

NOTE:Use only your fingers and a soft cloth to replace

the lamp.

1

SOCKET

Install the FixtureInstall the Lamp

2A

SLOT

1

Place one fixture connector slot from the top and the other
one from the bottom onto the MonoRail.

1

MONORAIL

1

FIXTURE
CONNECTOR

Use MR16 Front Cover HalogenMAX 50 Watt
Lamp.

1

Push the lamp pins completely into the socket.

1

2B

MONORAIL

FIXTURE
CONNECTOR

FIXTURE ARM

3

4

PLASTIC

INSULATOR

3

Slide the fixture connectors together until the plastic insulator
touches the other fixture connector.

4

Tighten the set screws on the fixture connectors with an Allen
wrench to lock the secure the fixture to the monorail.

SAVETHESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

2

A Generation Brands Company