LBL Lighting MO Element Adapter User Manual
Installation Instructions for
980MRWFIXC
Wall Monorail Rail Adapter
Wall Monorail
GP I :ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
This product is intended to be used with LBL Wall Monorail or
Monorail Chandelier systems.
Install the Adapter to Wall Monorail
RAILADAP-WALL_
1.0
1A
1
1
Remove the cap from the housing.
1B
2
2
From bottom of the Wall Monorail push the housing
completely onto the Wall Monorail.
WALL MONORAIL
1C
3
CAP
HOUSING
HOUSING
CAP
1D
4
WALL MONORAIL
ADAPTER
FIXTURE
FUSION JACK
4
Push the fixture Fusion Jack completely into the Wall Monorail
adapter.
1E
5
3
Replace and tighten the cap completely to the housing.
HOUSING
5
Tighten the fixture Fusion Jack completely to the Wall
Monorail adapter.
1
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
2
A Generation Brands Company
Loading...