Installation Instructions for
980HWBEACHSPCF
Hollywood Beach Suspension (Compact Fluorescent)
Suspension
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURNTHE POWER TO THE
ELECTRICAL BOX OFF.
PF650_CF
1.0
Assemble the Fixture
1A 1B
EYELET
EYELET
AIRCRAFT
CABLE
AIRCRAFT
CABLE
TOP VIEW
EYELET
SHADE
SHADE CAP
3
2
SOCKET
LAMP
SHADE
1
Feed the aircraft cables completely through the three
eyelet holes on the shade’s frame.
Use Volt, Type GU24MAX 27120 Watt
Base Self Ballasted Spiral Compact
Fluorescent Lamps.
22
Push the lamp pins into the large portion of the socket
slots and rotate it clockwise to lock it in place securely.
23
Ensure the shade cap is backed up enough to install
onto the shade’s frame.
1
1C
2B
SHADE
FRAME
SOCKET
ASSEMBLY
SOCKET
ASSEMBLY
2
4
Install the shade by sliding onto the socket assembly.
SHADE
FRAME
TOP VIEW
PEGS
2
2
Install the diffuser and align the holes to the pegs on
the shade.
3
Secure the diffuse by reinstalling and tightening the
three thumb screws.
NOTE: To re-lamp, reverse the section 2 instructions
to remove the diffuser and gain access to the lamps
and sockets.
DIFUSSER
25
Re-tighten the shade cap to secure the lamp shade.
Install the Diffuser
2A
THUMB
SCREWS
2
1
Unscrew and remove the three thumb screws.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
2