LBL Lighting Hollywood Beach SP User Manual
Installation Instructions for
980HWBEACHSP
Hollywood Beach Suspension
Suspension
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURNTHE POWER TO THE
ELECTRICAL BOX OFF.
LF650_2D
1.0
Assemble the Fixture
1A 1B
EYELET
EYELET
AIRCRAFT
CABLE
AIRCRAFT
CABLE
TOP VIEW
EYELET
SHADE
SHADE CAP
3
2
SOCKET
LAMP
SHADE
1
Feed the aircraft cables completely through the three
eyelet holes on the shade’s frame.
Use
Type A19 Medium Base Lamp.
2
Screw the lamps into the sockets.
3
Ensure the shade cap is backed up enough to install
onto the shade’s frame.
1
120 voltMAX 75 Watt
1C
2B
SHADE
FRAME
SOCKET
ASSEMBLY
SOCKET
ASSEMBLY
2
4
Install the shade by sliding onto the socket assembly.
25
Re-tighten the shade cap to secure the lamp shade.
SHADE
FRAME
TOP VIEW
PEGS
2
2
Install the diffuser and align the holes to the pegs on
the shade.
3
Secure the diffuse by reinstalling and tightening the
three thumb screws.
NOTE: To re-lamp, reverse the section 2 instructions
to remove the diffuser and gain access to the lamps
and sockets.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
DIFFUSER
Install the Diffuser
2A
THUMB
SCREWS
2
1
Unscrew and remove the three thumb screws.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2012 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
2
A Generation Brands Company
Loading...