LBL Lighting Futura User Manual
Installation Instructions for
980FUTURW
Futura
Wall
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for indoor dry locations only.
This product can be dimmed with a standard incandescent dimmer.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
JW940_240
1.2
Install the Fixture
1A 1B
METAL
SHADE
1
1
1
1
#8-32 PHILIPS SCREW
MOUNTING
PLATE
3
#8-32 SCREW
3
CROSSBAR
ASSEMBLY
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
3
ELECTRICAL BOX HOLE
1
Unscrew and remove the four #8-32 Philip screws from the
metal shade sides.
2
Remove the mounting plate.
1
1C
1D
5
8
9
NUT
6
MOUNTING PLATE
LOCK
WASHER
EXPOSED
THREADED
NIPPLE
4
In accordance with local electrical codes, make sure that the
mounting plate is grounded.
5
Connect the fixture white wire to the neutral power line wire
with a wire nut.
6
Connect the fixture black wire to the hot power line wire with
a wire nut.
7
Place all wires and wire nut connections properly inside the
electrical box.
8
Level the mounting plate vertically and slide the center hole
completely onto the exposed threaded nipple.
9
Secure the mounting plate to the threaded nipple with lock
washer and nut.
2
Loading...