LBL Lighting Fusion Jack Wood Canopy 7 Light Rectangle LED User Manual
Installation Instructions for
980FSJ7PLW
Fusion Jack 7-Port Rectangular Canopy
Ceiling
GP I :ENERAL RODUCT NFORMATION
This product is suitable for dry locations only.
This product is dimmable with a low-voltage electronic dimmer.
IMPORTANT! Do not install any head or pendant closer
than 12 inches to this canopy. Heat from the lamp may
damage the wood.
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
CK007RD-FJ_
CAUTION - RISK OF FIRE
1.0
Install the Backplate
1A
1 1 1 1
1 1
1
Remove all ten (10) button head screws around the chandelier
canopy.
1B
BACKPLATE
1C
BACKPLATE
3
4
4
2
Lift the backplate out of the canopy.
3
Feed the power line wires through the hole in the middle of
the backplate.
4
Mount the backplate to the electrical box with the two long
#8-32 screws provided.
1
Install the Canopy
1D 2A
1 1
5
6
2
5
Line up an anchor with the center of a backplate hole and
7
push the anchor in up to the threads.
2
6
Screw the anchor the rest of the way in with a screwdriver.
7
2
Secure the backplate to the anchors with the screws and
washers provided.
7
2
1
Hook a safety cable through the safety brackets on each end
1
SAFETY
CABLE
SAFETY
BRACKETS
of the canopy and backplate.
2
Loading...