LBL Lighting Fusion Jack Swag Hook User Manual
Installation Instructions for
980FSJSHOOK
Fusion Jack Swag Hook
Fusion Jack™
GP I :ENERAL RODUCT NFORMATION
This product must be used with Fusion Jack fixtures only.
FJ-SWAGHOOK-_
1.0
Mount the Swag Hook
1A
2
ANCHOR
1
Mark a point on the ceiling near the fixture where the swag
hook is to be mounted.
2
Push the anchor at the marked point into the ceiling up to the
threaded portion.
CEILING
1B 1D
ANCHOR
1C
4
THREADED
WASHER
Mount the threaded washer to the anchor with the #8 screw.
4
#8 SCREW
3
CEILING
3
Screw the anchor in the rest of the way with a Phillips
screwdriver.
5
SWAG HOOK
5
Screw the swag hook to the threaded washer.
1
THREADED
WASHER
1E
PENDANT WIRE
6
SET SCREW
6
Hook the fixture cord into the swag hook and tighten the M4
ALLEN
WRENCH
set screw snugly with the provided 2 MM Allen wrench.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
2
A Generation Brands Company
Loading...