LBL Lighting Athena W User Manual
Installation Instructions for
980ATHENW
Athena Wall
Wall
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
Install the Fixture
HW5498_2G60
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1.6
1A 1B
MOUNTING
PLATE
1
NOTE:Use the provided crossbar assembly if the
mounting plate holes do not match with the electrical box
holes.
1
Feed the fixture wires through the mounting plate center hole.
2
Connect the mounting plate to a suitable ground in accordance
with local electrical codes.
CENTER HOLE
3
4
5
6
MOUNTING
PLATE
6
Place all wires and wire nut connections properly inside the
electrical box.
Install the mounting plate to the electrical box with the
provided two #8-32 screws.
6
ELECTRICAL
BOX HOLE
#8-32 SCREW
3
Connect the fixture white wire to the neutral power line wire
with a wire nut.
4
Connect the fixture black wire to the hot power line wire with
a wire nut.
1
Install the Lamp & Shade
LAMP
1
2
NOTE:Use only your fingers and a soft cloth to install
the lamp.
Use 120 Volt, WattType T4,MAX 60
G9 Base, Bi-Pin Halogen Lamp.
SOCKET
CAP
2B2A
GLASS
SHADE
3
CAP
4
3
From bottom of the mounting plate slide the glass shade up
onto the threaded nipple.
4
Replace and tighten the cap completely to the exposed
threaded nipple to secure the glass shade in place.
THREADED
NIPPLE
1
Push the lamp pins completely into the socket holes.
Unscrew and remove the cap from bottom of the mounting
2
plate.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
2
A Generation Brands Company
Loading...