Installation Instructions for
Abbey Grande
Suspension
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
980ABBEYGSP
LF500_2D75
1.1
1.0
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Assemble the Fixture
1A 1B
1
OUTER
SHADE
CORD
THREADED
NIPPLE
THREADED
NIPPLE
4
CAP
INNER
SHADE
ASSEMBLY
2
1
1
1
Feed the cord from the inner shade assembly through the
outer shade.
1
2
Gently feed the inner glass assembly into the outer glass until
the threaded nipple is completly exposed.
3
Feed the cap through the fixture cord.
1
4
Secure the outer glass by tightly screwing the cap onto the
threaded nipple.
1
Install the Lamp
2A
CAUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
SOCKET
LAMP
Use MAX 75 Watt type A19
medium base incandescent lamp.
1
1
Refer to the instructions provided with the canopy to install
the fixture.
1
2
Screw the lamp into the socket.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 201 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a4
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
2
A Generation Brands Company