LB-Link 16mm lens for High Quality Camera User Manual

16 mm C-mount lens

The 16 mm lens provides a higher quality image
than the 6 mm lens. It has a narrow angle of view
which is more suited to viewing distant objects.

Fitting the C-CS adapter

Ensure the C-CS adapter that comes with the
High Quality Camera is fitted to the lens.
The lens is a C-mount device, so it has a
longer back focus than the 6 mm lens and
therefore requires the adapter.

Fitting the lens to the camera

Rotate the lens and C-CS adapter clockwise
all the way into the back focus adjustment ring.

Back focus adjustment ring
and lock screw

The back focus adjustment ring should be
screwed in fully. Use the back focus lock
screw to make sure it does not move out of
this position when adjusting the aperture or focus.

Aperture

To adjust the aperture, hold the camera with the
lens facing away from you. Turn the inner ring,
closest to the camera, while holding the camera
steady. Turn clockwise to close the aperture and
reduce image brightness. Turn anti-clockwise to
open the aperture. Once you are happy with the
light level, tighten the screw on the side of the
lens to lock the aperture into position.

Focus

To adjust focus, hold the camera with the
lens facing away from you. Turn the focus
ring, labelled “NEAR FAR”,
anti-clockwise to focus on a nearby
object. Turn it clockwise to focus on a
distant object. You may find you need to
adjust the aperture again after this.