Page 1
www.winsoonhardware.com
Barn Door Hardware
Installation Manual
※Check the Quantities
Note: If you encounter any problem with the package and the following installation,
please email us at [email protected]. Please also tell us your “ORDER
ID,” we will solve any issues for you as soon as possible.
Single Door Hardware Kit Includes
Part
Name
Track
Hanger
Floor
guide
Door
Stopper
Tube
Plug
Spacer
Junction
Plate
Hex
Wrench
Part
Name
Track
picture
picture
5FT4FT 6FT 6.6FT 7.5FT 8FT 9FT 11FT10FT 12FT13FT14FT 15FT16FT17FT 18FT
5.5FT
1
1
2
2
1
1
2
2
2 2 2 222 2 2 2 2 2 2 2 2 2 2 2 2
3
3 4
0
0
1 1 1 111 1 1 1 1 1 1 1 1 1 1 1 1
1
1
2
2
1
1
2
2
4
0
0
7FT
1
1
2
1
2
4
0
1
2
2
2
2
2
2
2
2
3
3
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
5
5
6
6
6
8 8 8 10
0
0
1
1
1
1
1
1
10
10
11
12
1
1
2
2
Double Door Hardware Kit Includes
5FT4FT 6FT 6.6FT 7.5FT 8FT 9FT 11FT10FT 12FT13FT14FT 15FT16FT17FT 18FT
5.5FT
1
1
1
1
7FT
1
1
1
2
2
2
2
2
2
2
2
3
3
3
2
1
2
2
3
Hanger
Floor
guide
Door
Stopper
Tube
Plug
Spacer
Junction
Plate
Hex
Wrench
4
4
4
2
2
2
4 4 4 444 4 4 4 4 4 4 4 4 4 4 4 4
2 2 2 222 2 2 2 2 2 2 2 2 2 2 2 2
3
3 4
0
0
0
1 1 1 111 1 1 1 1 1 1 1 1 1 1 1 1
● Installation Tools
Pencil Level RatchetWrenchRuler
4
2
4
0
drill
4
4
2
4
0
4
4
4
4
4
4
4
4
4
4
4
4
2
2
2
2
2
2
2
2
2
2
2
2
2
5
5
6
6
6
8 8 8 10
0
0
1
1
1
1
1
1
10
10
1
1
2
11
12
2
2
Router
1
Page 2
※Chart: Track Junction
19.7” 19.7”4.3” 4.3”
4FT
19.7” 19.7”7.3” 7.3”
4.5FT
19.7” 19.7”10.3” 10.3”
5FT
19.7” 19.7” 19.7” 3.45”3.45”
5.5FT
19.7” 19.7” 19.7” 6.45”6.45”
6FT
19.7” 19.7” 19.7” 10.05”10.05”
6.6FT
19.7” 19.7” 19.7” 19.7”2.6” 2.6”
7FT
19.7” 19.7” 19.7” 19.7”5.6” 5.6”
7.5FT
19.7” 19.7”4.3” 4.3”
8FT
19.7” 19.7”7.3” 7.3” 19.7” 19.7”7.3” 7.3”
9FT
19.7” 19.7”10.3” 10.3”
10FT
19.7” 19.7” 19.7” 3.45”3.45” 19.7” 19.7” 19.7” 3.45”3.45”
11FT
19.7” 19.7” 19.7” 6.45”6.45” 19.7” 19.7” 19.7” 6.45”6.45”
12FT
19.7” 19.7” 19.7” 10.05”10.05” 19.7” 19.7” 19.7” 10.05”10.05”
13FT
19.7” 19.7” 19.7” 19.7”2.6” 2.6” 19.7” 19.7” 19.7” 19.7”2.6” 2.6”
14FT
19.7” 19.7” 19.7” 19.7”5.6” 5.6” 19.7” 19.7” 19.7” 19.7”5.6” 5.6”
15FT
19.7” 19.7”10.3” 10.3” 19.7” 19.7”10.3” 10.3”
16FT
19.7” 19.7” 19.7” 6.45”6.45” 19.7” 19.7” 19.7” 6.45”6.45”
17FT
19.7” 19.7” 19.7” 6.45”6.45” 19.7” 19.7” 19.7” 6.45”6.45” 19.7” 19.7” 19.7” 6.45”6.45”
18FT
19.7” 19.7”4.3” 4.3”
19.7” 19.7”10.3” 10.3”
19.7” 19.7” 19.7” 6.45”6.45”
19.7” 19.7”10.3” 10.3”
Prepare Your Doors
● Steel Hanger Installation Dimensions
Note: Find the installation dimensions for your Steel Hanger style in the chart below:
type a type b type c
2-1/4” 2” 2”
2
Page 3
※Hardware Installation
Step 1: Attach Steel Hangers to Your Doors
a.Please choose the correct roller installation according to your roller shape on page
2 above and the illustration below.
b.Attach Hangers as shown below.
2-1/4”
Step 2: Cut Floor Guide Slot At The Bottom Of The Door
Cut a 3/4” wide, 3/4” deep slot at the bottom of the door.Recommended: Cut the slot
with a router and slot cutter bit.
3/4”
3/4”
Prepare and Install the Tracks
Step 3: Connect Tracks And Install Door Stoppers
a.Connect your tracks with junction plates if needed.
b.Loosely install the Door Stoppers near each end of the track (final positioning will
be determined at the end of the installation (Step 9)).
Step 4: Install Spacers
a.Putting the b-3 into the rail and make the hole directionof b-3, rail and b-2 is
consistent.
b.Installing in order from inside to outside to prevent missing the hole.
b-2
b-3
3
Page 4
Step 5:Draw Line for the Track
Using a level, draw a line to install the Track, at the door height + 2-11/16” above
the floor.
door height + 2-11/16”
Step 6: Mark and Drill Track Holes
a.Line up a Track on the line and mark the location of the holes.
b.Punch all the marked positions into the wall with impact drill, put the expansion
pipes into the holes created, then punch the pipe pins into the wall until the expansion
pipes expand at their ends, screw b - 1 into the expansion pipe.
1.1”
18.59”
1.1”
18.59”
1.1”
18.59”
door height + 2-11/16”
1.1”
1-3/32”
Step 7: Install The Track
a.Overlapping b - 1 and b - 2 and tighten to fix the rails to the wall.
b.Now you have installed the track on the wall successfully.
door height + 2-11/16”
1.1”
b-1
b-1
b-2
4
Page 5
Hanging and Positioning Doors
Step 8: Install Your Doors
Hang your Steel Hangers on the Track, and then adjust the anti-jump bar up or down
so that it could make the roller clamp the track.
Anti jump
device
Step 9:Install the Floor Guide
Position the door at your desired close position, put half of the floor guide under the
door, mark the location, and then fix guide to the floor.Position doors in your desired
closed and open position and adjust Door Stoppers.
Single Door
5
Page 6
Double Door
WARNING
• Failure to wear proper safety gear (i.e.,eye protection) may result in serious injury or death. Always wear proper safety gear before
using power tools.
• Improper operation of power tools may result in loss of control, serious injury or death. Always ensure you have complete control of
the power tool and the work area is free of hazards before operatiog a power tool.
• Lack of secure clamping of the door may result in unexpected movement of the door,loss of power tool control and serious injury or
death. Always securely clamp the door in place before cutting,or drilling, the door.
• Lack of ,or improperly installed Anti-jump Disc may result in the door coming off the track and cause serious injury or death.
installation of Anti-jump Disks are required for safe operation of this hardware. installed properly, these discs will keep the door
securely attached to the teack.
CAUTION
• Mishandling of heavy objects (i.e.,doors) may cause a loss of balance and serious injury. Always be sure you have a secure hold
on the object and are balanced before moving the object.Always wear safety shoes when lifting heavy objects.
• Getting body parts (i.e., hair,fingers) caught in moving parts may cause pinching and serious injury.Do not put fingers in parts that
may move and always remove or contain anything on your body that may become entangled with a moving part.
• Closing sliding doors with your hand on the end of the door may result in your hand, or fingers, getting caught between the door
and other solid objects (i.e., another door, molding) causing serious injury. Always use the door handle to close doors.
Usage Statement:
Use of excessive force when opening, and closing,the door(s) may result in damage to the hardware. Always hold the handle and gently
open and close the door(s).
Warranty Statement:
5 year straight unconditional warranty service enables every single hardware’s durability coverage during its life time.
www.winsoonhardware.com
6
Loading...