Layher 3201, 3202, 3203, 3204, 3205 Instructions For Assembly And Use

Layher Uni Light Tower

Instructions for Assembly and Use

Mobile working platforms

according to DIN EN 1004:2005-03

Working platform 0.75 x 1.8 m

max. working height:

indoors 9.3 m

outdoors 9.3 m

Rolling Towers

Load bearing capacity 2.0 kN/m

on max. one working level

(scaffold group 3 as per DIN EN 1004:2005-03)

2

Tower Types Layhe r Uni L i ght T o w er

For outdoor use observe height limits!

Tower Models
3201– 3207

Tower Model 3201 3202 3203 3204 3205 3206 3207

Working height (m) 3.15 4.3 5.3 6.3 7.3 8.3 9.3
Scaffold height (m) 2.44 3.55 4.55 5.55 6.55 7.55 8.55
Platform height (m) 1.15 2.3 3.3 4.3 5.3 6.3 7.3
Weight (kg) 54.3 118.7 127.1 148.9 190.6 208.3 222.7

Assembly

A1 Pay attention to the General Assembly and Usage Instructions on page 6. The examples shown of the tower models 3201– 3207 are designed for use indoors

and outdoors. Pay attention to the parts list and ballasting table on page 5.

A2 Tower Model 3201

Drawing 1

9

2

Insert the castors 9 into the ladder frames 1 and
secure against falling out by fastening the bolts M

1

12x60 and self-securing nuts through the holes pro-

5

5

2

9

1

9

vided. Connect and brace both ladder frames 1 with
two double guardrails 5. Clip the access deck 2 onto
the 4th rung from the bottom. The snap-on claws of
all parts are to be locked onto the ladder frames 1
from above.

A three-part side guard must be attached when this
is required by the regulations applying for the job to
be performed.

In order to remove the different parts, depress the
locking clips of the snap-on claws. The red claws

9

of the deck enable a single person to assemble or
dismantle them easily; open them at one end and
rest the base of the clips on the rung. Now open
the opposite clips and remove the deck.