MODEL: LI-S244
MODEL NAME: PULSE
Schematic diagram:
1. USB/SD
2.
3.
select key
number select key
USB/SD play/pause control key
Input select USB/SD; FM ; LINE; BLUE
4. USB/SD play
5. EQ control key
6. USB/SD play repeat select key
7. Play control & FM CH- or CH+ & volume + or -
8. Line AUX input select key
9. Radio FM input select key
10. Radio FM scan control key
OPERATION INSTRUCTION FOR KARAOKE &WIRELESS MICROPHONE
1.Insert the microphone plug into the microphone input MIC2.
2.Adjust the microphone volume knob MIC VOL for proper volume.
Then adjust the echo depth to the proper position. Now you can start
the karaoke.
3.Open wireless MIC “on & off ” button, Adjust the microphone volume
knob MIC VOL for proper volume. and adjust the echo depth to the
proper position. Then you can start the wireless Microphone.
OPERATION PANEL
1. Radio FM antenna
2. DC12V battery input
3. DC/AC power on/off
4. AC power on/off
5. HDMI output
6. Audio DVD or AUX input
7. AC ~110V-120V/60Hz input
10
11
1213
14
6
89
7
15
1.
2. MIC 2 input jack;
3. MIC echo adjustor;
4. MIC volume;
5. USB/SD player control key ;
6. Charging & full LED;
7. Audio input Video & Mp3 Switch
8. Volume Adjustor;
9. Low voltage LED
10. Main treble volume;
11. Main bass volume;
12. EQ on/off key;
13. Guitar volume ;
14. Guitar input jack;
15. EQ control;
MIC 1 input jack;
7
OPERATION PANEL
1. Please press the “MODE” button to start the Bluetooth connection. This
will turn on the Bluetooth flashing LED light on the control panel.
2. Your unit will now be ready to pair with your mobile device via Bluetooth .
From your mobile device scan for “LAX-MAX”. The password for connection is
“0000” and once you have paired your device to the DJ system, the LED
flashing light will become solid.
3. You can control the volume and tracks from the unit’s control panel or from
your external Bluetooth enabled device.
Bluetooth Connection:
Matters need attention:
Battery is integrated in the unit with an auto protection function.When
the battery is out of power and you need to recharge your speaker unit
be sure the power switch is ON before you connect the system to 110V
power plug. When your unit is charging the red LED indicator will be ON.
PLEASE NOTE: If you do not set the power switch to ON before charging
the unit, the battery auto protection will take effect and the unit will
NOT charge.
1.
Full recharge takes 8-12 hours
Voltage for recharge must be ~110V-120V
When you are using your unit while it is plugged to an external power
source,be sure the battery switch is ON.
To protect the lifespan of the built in battery ,be sure to fully charge
your unit on the same day the battery runs out. Not charging your unit
right away can hurt the long term life span of your unit.
When you change fuse, please use model (10A)
2.
3.
4.
5.
6.
MODE : AUX . BLUE . USB/SD . FM;
PREV OR RADIO FM CHANNEL -
NEXT OR RADIO FM CHANNEL+
PL/PA OR RADIO FM SCAN
REPEAT : PRESS ONE TIME REPEAT
SINGLE, PRESS TWO TIMES REPEAT ALL
VALUED CUSTOMER
Thank you for purchasing the LAX-MAX New Generation
professional DJ system, please be sure to follow operating
instructions to insure proper use of this unit.
Keep this manual for your future reference.
OPERATION PANEL
Output power(RMS): 50W
Output Impedance: 4(ohm)
S/N: 76dB
Input sensitivity: 500mV
Frequency response: 40Hz-20KHz
Rating Voltage: ~ 110V- /50-60Hz120V
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Manual de Usuario
MODELO: LI-S244
Nota: con fo rm e vamo s ac tu alizan do nuestro
pro du cto, n os res er va mo s el derecho de modif ic ar e l
pro du cto sin notificac ió n po r adelanta do.
M NAME: PULSEODELO
PANEL DE OPERACIÓN
INSTRUCCIONES DE OPERACIÓN PARA KARAOKE Y MICRÓFONO INALÁMBRICO
1.Conecte el enchufe del micrófono a la entrada de MIC 2.
2.Ajuste el volumen de micrófono en la perilla de MIC VOL para obtener el volumen deseado.
Luego ajuste la profundidad del eco a la posición correcta. Ahora puede comenzar a usar el
karaoke.
3.Abra el botón de MIC inalámbrico ON/OFF. Ajuste el volumen del micrófo no en la
perilla MIC VOL para obtener el volumen deseado y ajusto la profundidad del eco a la
posición co rrec ta. Ahora puede comenzar a usa r el mic rófono inalámbrico.
SISTEMA DE ALTAVOZ
Schematic diagram:
1. USB/SD
2.
3.
select key
number select key
USB/SD play/pause control key
Input select USB/SD; FM ; LINE; BLUE
4. USB/SD play
5. EQ control key
6. USB/SD play repeat select key
7. Play control & FM CH- or CH+ & volume + or -
8. Line AUX input select key
9. Radio FM input select key
10. Radio FM scan control key
7
1. Radio FM antenna
2. DC12V battery input
3. DC/AC power on/off
4. AC power on/off
5. HDMI output
6. Audio DVD or AUX input
7. AC ~110V-120V/60Hz input
10
11
1213
14
6
89
7
15
1.
2. MIC 2 input jack;
3. MIC echo adjustor;
4. MIC volume;
5. USB/SD player control key ;
6. Charging & full LED;
7. Audio input Video & Mp3 Switch
8. Volume Adjustor;
9. Low voltage LED
10. Main treble volume;
11. Main bass volume;
12. EQ on/off key;
13. Guitar volume ;
14. Guitar input jack;
15. EQ control;
MIC 1 input jack;
PANEL DE OPERACIÓN
SISTEMA DE ALTAVOZ
ASUNTOS QUE REQUIEREN ATENCIÓN:
1.Las celdas de batería están integradas dentro del producto, con función de
auto-protección. Cuando las baterías se queden sin carga, debe encender el
interruptor antes de conectar al enchufe de 110V, de otra manera la autoprotección comenzará a funcionar y no se cargará la batería. Durante la
recarga el indicador de luz roja se encenderá.
2.La recarga completa toma de 8-12 horas.
3.El voltaje para recarga debe ser de 110V-120V.
4.Cuando escuche música con energía eléctrica externa, encienda el
interruptor de batería.
5.Para que la vida de la batería dure un largo periodo, recargue
completamente el mismo día que se quede sin batería. Entre más
tiempo le tome recargar la batería, esto puede dañar la duración de vida
de la batería.
6.Cuando cambie el fusible, use uno del mismo modelo (10A)
1. Presione el botón MODE para comenzar a usar la función de conexión
Bluetooth . Esto encenderá una luz parpadeante de conexión Bluetooth en
el panel de control.
2. Su unidad está ahora lista para emparejar su dispositivo móvil a través de
la conexión Bluetooth . Desde su dispositivo móvil busque “LAX-MAX”. La
contraseña para la conexión es “0000” y una vez emparejado su dispositivo
con el sistema de DJ la luz parpadeante se volverá fija.
3. Mientras usa la función Bluetooth puede controlar el volumen y las
canciones desde el panel de control o desde su dispositivo móvil.
CONEXIÓN BLUETOOTH :
MODE : AUX . BLUE . USB/SD . FM;
PREV OR RADIO FM CHANNEL -
NEXT OR RADIO FM CHANNEL+
PL/PA OR RADIO FM SCAN
REPEAT : PRESS ONE TIME REPEAT
SINGLE, PRESS TWO TIMES REPEAT ALL
PANEL DE OPERACIÓN
SISTEMA DE ALTAVOZ
CLIENTE VALIOSO
Gracias por comprar el Sistema Profesional de DJ de LAXMAX New Generación, asegúrese de seguir las instrucciones
de operación para garantizar el uso correcto de esta unidad.
Guarde este manual para futuras referencias.
Nombre:
Dirección:
Tel. Oficina:
Tel. Casa:
Modelo del Producto:
Fecha de compra:
Número de Factura:
Nombre y dirección de la tienda:
Registro de Reparación:
Comentarios del usuario:
Salida de energía (RMS):
Salida de resistencia:
S/R
Entrada de sensibilidad:
Frecuencia de respuesta:
Valor de voltaje:
50W
4 (OHMS)
76 dB
500mV
50Hz-18KHz
~ 110V- 50Hz/60Hz120V
Loading...