Lawrence REPLACING A PLASTIC SPLINE WITH A ZINC SPLINE User Manual

TOOLS REQUIRED:

• Phillips head screwdriver

• Slide Bar

• Metal Spline

INSTRUCTIONS:

Step 1

Determine which spline to change. Tighten all the
other splines.

Step 2

Loosen up the spline, take slide bar and lightly tap
spline from the top.

Step 3

Remove and Replace with metal spline

Step 4

Slide in spline and fit into place, gently tap spline with
slide bar until spline pops into place.

Step 5

Line up spline and replace screw, must be screwed in
firmly.

Step 6

Turn over and follow instruction in order to replace
another spline.

Note: Replace one spline at a time. Do not loosen
more tahn one spline at a time..

Replacing Plastic Splines with Metal

Splines

Tools

Step 1 & Step 2

Step 4 & Step 5

Step 3

Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: [phone] • www.lawrencemetal.com

e-mail: [e-mail] • PO Box 400 • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA