Lawrence POST AND BEAM ASSEMBLY User Manual

TOOLS REQUIRED:

• Phillips head screwdriver and a 2.5mm Metric
Allen Wrench

INSTRUCTIONS:

Step 1

Dry fit Panel System together. Positions should
be marked prior to drilling and fastening.

Step 2

Posts set in place

Step 3

Position Lower Beam

Step 4

Fasten Lower Beam in position using 2.5mm
Metric Allen Wrench

Step 5

Position Panel (May need 2 persons depending
on size)

Assembling a Lawrence Post and Beam

System

Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: [phone] • www.lawrencemetal.com

e-mail: [e-mail] • PO Box 400-M • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA

step 1 step 2

step 3

step 4

step 5

TOOLS REQUIRED:

• Phillips head screwdriver and a 2.5mm Metric

Allen Wrench

INSTRUCTIONS:

Step 6

Panel located in Lower Beam

Step 7

Position Upper Beam

Step 8

Fasten Upper Beam in position using 2.5mm

Metric Allen Wrench

Step 9

Finished Panel System

Assembling a Lawrence Post and Beam

System

Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: [phone] • www.lawrencemetal.com

e-mail: [e-mail] • PO Box 400-M • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA

step 6

step 7

step 8

step 9