Lawrence HOW TO INSTALL A CONTINUOUS WRITING SURFACE User Manual
TOOLS REQUIRED:
• Flat head screwdriver
• Phillips head screwdriver
• Drill with 1/16” bit
INSTRUCTIONS:
SStteepp 11
Position joining connector to post
SStteepp 22
Push down to fit brackets on top of post
SStteepp 33
Tighten locking screw using screwdriver
SStteepp 44
Position connector brackets onto post
SStteepp 55
Push down to fit brackets unto post
How to Install A Continuous W
How to Install A Continuous W
riting
riting
Sur
Sur
face
face
Step 1
Step 2
Step 3
Step 4
Step 5
Step 3
Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: 631.666.0336 • www.lawrencemetal.com
e-mail: service@lawrencemetal.com • PO Box 400-M • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA
TOOLS REQUIRED:
• Flat head screwdriver
• Phillips head screwdriver
• Drill with 1/16” bit
INSTRUCTIONS:
SStteepp 66
Mark positions for pilot holes to connect joint
connector to writing surface
SStteepp 77
Remove writing surface and drill 1/16” blind
pilot holes. Be careful to not drill completely
through writing surface top.
SStteepp 88
Reposition writing surface and secure using
Phillips head screw driver
SStteepp 99
Tighten screw to secure writing surface to post
WWrriittiinngg SSuurrffaaccee iiss nnooww ccoommpplleettee!!
How to Install A Continuous W
How to Install A Continuous W
riting
riting
Sur
Sur
face
face
Step 6
Step 9
Loading...