Lawrence FIXED POST User Manual

TOOLS REQUIRED:

Outdoor Installation (Concrete)

• 5/8” Expansion Shields, 5/16” bolt

• Drill with 1/4” & 5/8” carbide tipped drill
bits

• Pencil/Marker

Indoor Installation (Carpet/Wood)

• 1 1/2” x 14 wood or chrome screws

• Phillips Head Screwdriver

INSTRUCTIONS:
OUTDOOR (CONCRETE) INSTALLATION:

SStteepp 11
Mark three holes on the floor thru the 5” flange where
post should be mounted.

SStteepp 22
Drill three 1/4” pilot holes followed by 5/8” dia.
holes to the depth of the shields

SStteepp 33
Bolt thru flange and into shield to fasten post to floor

INDOOR (CARPET/WOOD) INSTALLATION:
Step 1

Position post in desired location

Step 2

Remove carpet and padding under flange. Cover
frayed ends with flange

Step 3

Secure Post by drilling screws thru 5” dia. flange

NNoottee::

These fastening procedures and products have been found to be
effective in a wide variety of applications, however as always, we rec­ommend that the installer assess the application of the product, flow pat­ter of expected traffic, and the specific flooring composition to properly
select the appropriate fastening system

Fixed TensaBarrier®Post

Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: [phone] • www.lawrencemetal.com

e-mail: [e-mail] • PO Box 400-M • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA

Expansion
shields

Screws