Lawrence 899HD User Manual

TOOLS REQUIRED:

• Phillips head screwdriver

INSTRUCTIONS:

Step 1

Begin by lifting sign and placing the adapter
on the TensaBarrier post top.

Step 2

Adapter slots should line up with the belt
receivers on post.

Step 3

Using your Phillips head screwdriver, tighten
the screw on the adapter, thereby tightening
the sign to the post.

Step 4

Test the sign by trying to turn the adapter by
hand, if adapter moves you should continue to
tighten.

Sign is now ready for use.

ATTACHING THE SIGN ASSEMBLY TO THE

TENSABARRIER

®

POST

Step 1

Step 2

Step 3

Step 4

Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: [phone] • www.lawrencemetal.com

e-mail: [e-mail] • PO Box 400-M • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA