LaView HD-SDI Bullet, Type I, Type II, Type III Camera User Manual

0

Camera

HDS IR Bullet Camera

User Manual

HD-SDI IR Bullet Camera·User Manual

1

1

Thank you for purchasing our product. If there are any questions, or
requests, please do not hesitate to contact the dealer.

This manual may contain several technical incorrect places or
printing errors, and the content is subject to change without notice.
The updates will be added to the new version of this manual. We will
readily improve or update the products or procedures described in
the manual.

DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the

performance or reliability of the security or signaling aspects of this
product. UL has only tested for fire, shock or casualty hazards as
outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification
does not cover the performance or reliability of the security or
signaling aspects of this product. UL MAKES NO REPRESENTATIONS,
WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING
RELATED FUNCTIONS OF THIS PRODUCT.

Regulatory Information

FCC Information
FCC compliance: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful

HD-SDI IR Bullet Camera·User Manual

2

2

interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the users will be required to correct the interference at their
own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including
interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied
accessories too are marked with "CE" and comply

therefore with the applicable harmonized European
standards listed under the Low Voltage Directive 2006/95/EC, the
EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment,
or dispose of it at designated collection points. For more information,
please see: www.recyclethis.info.

2006/66/EC (battery directive): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.

HD-SDI IR Bullet Camera·User Manual

3

3

See the product documentation for specific battery information. The
battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a designated
collection point. For more information, please see:

www.recyclethis.info.

Safety Instruction

These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings

are neglected.
Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

WarningsFollow these
safeguards to prevent
serious injury or death.

Cautions Follow these
precautions to prevent
potential injury or material
damage.

HD-SDI IR Bullet Camera·User Manual

4

4

Warnings

 In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region.

 Please refer to technical specifications for detailed information.
 Input voltage should meet both the SELV (Safety Extra Low Voltage)

and the Limited Power Source with AC 24V or DC 12V according to
the IEC60950-1 standard. Please refer to technical specifications
for detailed information.

 Do not connect several devices to one power adapter as adapter

overload may cause over-heating or a fire hazard.

 Please make sure that the plug is firmly connected to the power

socket.

 When the product is mounted on wall or ceiling, the device shall

be firmly fixed.

 If smoke, odor or noise rise from the device, turn off the power at

once and unplug the power cable, and then please contact the
service center.

 If the product does not work properly, please contact your dealer

or the nearest service center. Never attempt to disassemble the
camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)

Cautions