Lava Heat Lava Post User Manual

Unpack the heater making sure that all the items are present and
that there are no components left in the box and that the heater
head is free from any packing material.

Using the detailed drawing follow the steps to assemble your
heater.

Do not connect the heater to the electri cal supply until all the
assembly is complete.

Do not connect the heater to the electrical supply if any of the
components or the power cord is damaged in any way.

If in doubt contact your supplier.

Operation

The switch on the heater is used to control the Heating. (I) for 1500W.

The 0 position is off.

Although the patio heater is shower proof, do not use when raining

or in wet conditions.

Always disconnect the power cable from the electrical supply,

when the patio heater is not in use.

Care and maintenance

• When disconnected from the electrical supply, clean the

outside of the patio heater with a damp cloth. Never use
corrosive or solvent cleaners or immerse in water.

• Any maintenance or repairs including replacing the halogen

tube should only be carried out by a qualified electrician or by
a recommended service center.

Technical specification

• Power supply 120V~ 60Hz

• Wattage max 1500w

• Net weight 18.0 kg

• Insulation class I

• Height 180 cm

1 6

•

•