Lauten Audio LS-308 Operation Manual

LS-308

Noise Rejection, High-Dynamic Range, Large Diaphragm Condenser Microphone

PRODUCT OVERVIEW & OPERATION MANUAL

LS-308 Overview and Operation Manual – Version 1.3 COPYRIGHT 2019 LAUTEN AUDIO

Summary

The LS-308 is a noise rejecting, high-dynamic range microphone to be used as a problem solver in
challenging recording situations when isolation is needed but difficult to achieve. Designed for use in
studio, broadcast, and sound reinforcement environments when sources are in very close proximity and
isolation of those sources is difficult; for example, a small commentators booth with multiple
commentators, or rejecting drums from a guitar amp on a tight stage. The LS-308 is a large-diaphragm
condenser microphone featuring exceptional off-axis frequency rejection combined with ultra-high
dynamic range. Constructed from high-quality components and outfitted with frequency shaping high
and low-cut filters, the LS-308 offers excellent handling capabilities. It includes two different mounting
options, a foam windscreen, and a road case.

The LS-308 is a great choice for

 When off-axis rejection is important
 Highly dynamic instruments in noisy environments
 Close micing drums and guitars both studio and on-stage
 Close-quarter broadcast booths when off-axis rejection is essential
 Podcast and Voice-overs when off-axis rejection is essential

Page | 2

LS-308 Overview and Operation Manual – Version 1.3 COPYRIGHT 2019 LAUTEN AUDIO

Detailed Description

The LS-308 offers 270 degrees of side and rear frequency rejection reducing nearby sound by up to
25dB. The rejection is achieved with Lauten Audios’ unique dual, large-diaphragm pressure gradient
transducer element in combination with its specially designed circuit. The LS-308 is intended for use in
multi-person close-proximity vocal dialogue, like close-quarter broadcast commentary, or when the
rejection of other instruments, crowds, etc., in a live studio, on-stage or sound reinforcement is desired.

The LS-308 does not require pre-attenuation and can handle 135dB+ of SPL. The circuit also allows for
an ultra-wide 120db of dynamic range. These features give engineers the ability to capture high dynamic
sources, and in noisy environments.

The Independent, multi-stage, high and low-cut filters help engineers balance recordings at the
microphone and aid in successfully capturing the source. The 2-stage low-cut aids in reducing low
frequency rumble and proximity effect. The 2-stage high-cut helps tame high frequencies.

Fully accessorized both internally and externally, the LS-308 comes with the following.

 Internally shock mounted transducer elements to help reduce rumble and handling.
 Detachable side swing arm mount
 Hard mount for added mounting versatility
 Foam windscreen to protect the transducer element from plosives, wind, and debris
 Hard-case that fits all accessories and built for the rigors of the road.

Unlike any microphone of its kind on the market today, the LS-308 offers exceptional noise rejection and
dynamic-range capabilities for recording in challenging environments.

Key Features

270° degrees of off-axis sound rejection

Full 120dB (135dB total) of dynamic range without the need of additional attenuation

Independent 2-stage low and high-cut frequency switches

Internally shock mounted pressure gradient condenser elements

Swing-arm mount with 135 degrees of movement (removable)

Included threaded hard mount

Foam windscreen for plosive and wind rejection

Page | 3