Allen Wrench
(Included)
2 - Persons
Recommended
1 / 8
EASY DIFFICULT
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
T
hank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you
purchase our product. We fully stand behind our products from start to finish.
CHECK
BEFORE STARTING
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
re there any irregularities or flaws in the
A
parts? We can send replacements!
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
2 / 8
PRE ASS EM BLY
INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
Teamwo rk
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
3 / 8
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
4 / 8
CHAIR
#1 1pc x2
Chair Back
#2 1pc x2
#A 4pcs x2
Bolt Ø1/4" x 3"
Lock Washer Ø1/4"
#D 10pcs x2
Flat Washer Ø1/4"
#E 10pcs x2
#F 1pc x2
5 / 8
Allen Wrench 4mm
Seat
Front Leg
#3 2pcs x2
#B 4pcs x2
Bolt Ø1/4" x 2-1/2"
#C 2pcs x2
Bolt Ø1/4" x 1-1/2"
6 / 8
Exploded View
#1
#2
#3
x 2
ASSEMBLY INSTRUCTIONS
1
Part
#1 x1pc
Part
#2 x1pc
Hardware
#C x2pcs
7 / 8
Hardware
#D x2pcs
#1
#2
#F
#C
#D
#E
#F
#A
#D
#E
#2
#1
Hardware
#E x2pcs
2
Hardware
#A x4pcs
Hardware
#D x4pcs
Hardware
#E x4pcs
Align seat (#2) to chair back (#1), then
secure by using bolts (#C) with washers
(#D,E).
Secure corner holes of the seat (#2) to chair
back (#1) by using bolts (#A) with washers
(#D,E).
ASSEMBLY INSTRUCTIONS
8 / 8
#3
#2
#F
#B
#D
#E
3
Part
#3 x2pcs
Hardware
#B x4pcs
Hardware
#D x4pcs
Hardware
#E x4pcs
4
Align front legs (#3) to the seat (#2), then
secure by using bolts (#B) with washers
(#D,E).
Loading...