ASSEMBLING & INSTALLATION INSTRUCTIONS
(
)
(
)
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJ ON CTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and
all hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts on a clear
area. Be care not to lose any small parts necessary for installation.
3. Attach the crossbar to the Junction Box with the two junction box
screws as shown. The side of the cross bar marked "GND" must face
out. The junction box is not included.
4. By measuring, determine correct cord length needed for proper
hanging height, then lock it securely with small screw(C). NOTE:
slide cord clip to the proper position, then you may cut extra
cord.
5. While holding the lamp body towards the ceiling, connect the
electrical wires as Shown in Fig.2, making sure that all wire nuts are
secured. You may have to wrap the connections with electrical tape.
If your outlet has a ground wire (green or bare copper), connect the
fixture ground wire to it. Otherwise connect fixture’s ground wire
directly to the Mounting plate with the green screw provided. After
wires are connected, tuck them carefully inside the Junction Box.
6. Install canopy (A) onto the junction box, aligning screw hole on
crossbar with mounting holes in canopy and lock it securely with the
screws (B).
7. Raise the glass shade(D) to the lamp holder, lock it securely with the
check ring(E). NOTE: THE GLASS SHADE(D) OF THE PRODUCT
MAY VARY.
8. Install the light bulb(not included) in accordance with the fixture’s
specifications. NOTE: DO NOT EXCEED THE SPECIFIED
WATTAGE!!
Your installation is now complete. Return power to the junction
box and test the fixture.
MINI PENDANT
FIG.1
FIG.2
Cord clip
(Glass may vary)
FIXTURE
WIRES
BLACK
HOUSE
WIRES
Black
Hot
Need assistance with parts or assembly? Please call customer service
FIXTURE
WIRES
WHITE
HOUSE
WIRES
White
Neutral
Thank you for purchasing a product.
FIXTURE
WIRES
GREEN
Thread
(Ground)
Green or
Copper(Ground)
HOUSE
WIRES
Bare
Loading...