1 / 8
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
2 - People
(Included)
Allen Wrench
Recommended
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
CHECK
BEFORE STARTING
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
2
/ XXXXXXX8
PRE ASS EM BLY
INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
Teamwo rk
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
3 / XXXXXXX8
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
4 / XXXXXXX8
TABLE
#1 1pc
#3 4pcs
#4 1pc
#A 8pcs
#B 8pcs #C 8pcs
5 / 8
Base
Glass Top
Allen Wrench
M5
Stand
Lock Washer
Ø1/4"
Flat Washer
Ø1/4"
Bolt
Ø1/4" x 3/4"
Allen Wrench
M4
Threaded Stud
Ø1/4" x 3/4"
Lock Washer
Ø5/16"
Flat Washer
Ø5/16"
Spacer
L - Bracket
#2 1pc
Shelf Panel
#D 1pc
#E 4pcs
#F 4pcs
#G 8pcs
#H 8pcs
#I 8pcs
#J 1pc
Bolt
Ø5/16" x
#K 4pcs
2"
6 / 8
Exploded View
#1
#2
#3
#4
1
2
Part
#3 x4pcs
Part
#4 x1pc
Hardware
#A x4pcs
Hardware
#B x4pcs
Hardware
#C x4pcs
7 / 8
ASSEMBLY INSTRUCTIONS
#A
#B
#C
#D
#4
#3
#2
Hardware
#E x4pcs
Hardware
#G x8pcs
Hardware
#H x8pcs
Hardware
#I x8pcs
Part
#2 x1pc
Hardware
#A x4pcs
Hardware
#B x4pcs
Hardware
#C x4pcs
#3
#4
#H
#G
#J
#A
#B
#C
#E
#D
Align brackets (#E) to legs (#3), then
secure by using bolts (#A) with
washers (#B,C).
DO NOT FULLY TIGHTEN ALL BOLTS
UNTIL ASSEMBLY IS COMPLETED.
Align legs (#3) to base (#4), then
secure by using bolts (#G) with
washers (#H,I).
Align shelf (#2) to the brackets, then secure by using
bolts (#A) with washers (#B,C).
#I
3
4
Hardware
#F x4pcs
Hardware
#K x4pcs
Part
#1 x1pc
8 / 8
ASSEMBLY INSTRUCTIONS
#F
#K
#1
Attach threaded bolts (#F) to the top of the legs, then
attach spacers (#K) onto threaded bolts (#F).
Loading...