Caution :You must read this before you proceed
Right Arm Sofa
Label Picture Description QTY
A Chair Seat 1
B Backrest 1
C Back Cushion 1
D Leg 4
E Right Arm 1
1 of 8
Label Picture Description QTY
Washer Rings 7
Before Beginning Assembly:
①
②
③
④
⑤
⑥
⑦
Allen key 1
Bolt M8*50mm 3
Bolt M8*20mm 2
Spring Washer 4
Flat Washer 4
Connecting Piece 1
2 of 8
Step 1
Back Cushion (C)
C
D
Backrest(B)
Right Arm(E)
Chair Seat(A)
Leg (D)
Leg (D)
Leg (D)
FRONT FA CING
This Arm Sofa has multiple parts and may require up to some 30 minutes
to assemble. To give you an overview of the Arm Sofa parts, the above
picture is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and
steps before assembly.
A
Position the arm sofa on its back,as shown.
Unzip to open pouch and remove the 4 wooden legs and Back Cushion ,
close the pouch.
3 of 8
Step 2
Step 3
Step 4
D
D
A
D
Stand the Chair Seat(A) up as show in the left Picture.
Attach the Connecting Piece(⑦) to Chair Seat(A) using Bolts(④), Spring
Washers(⑤), and Flat Washer (⑥) with Allen Key(②) as shown in the right
picture.
A
Attach the Right Arm (E) to Chair Seat(A) on the other side by using
Bolts(③), Spring Washers(⑤), and Flat Washer (⑥) with Allen Key(②) as
shown in the picture.
E
Washer Ring(①)
A
E
4 of 8
Step 5
Install the Legs(D) into the bottom of the Seat(A) by placing a Washer
Step 6
D
D
D
D
Ring(①) onto the threaded stem of the Legs.
And then insert the threaded stem into the threaded mounting position at
each Corner of the Bottom of the Seat(A).
Tighten by turning the Legs clockwise.
Note: The use of Washer Rings(①) are OPTIONAL and are especially
useful to help alleviate slight wobbles. Some Legs may need more than
oneWasher Ring whilst some Legs may not need any.
Position arm sofa right side up and test for stability on a Level Surface.
Add or remove Washer Rings(①) where needed to achieve stability.
Cover the bottom of the Chair Seat(A) with the non-woven fabric.
Smooth down the Magic Tape on all four sides of the Seat by hand.
Chair Seat(A)
Backrest(B)
Right
Arm(E)
Chair Seat(A)
5 of 8
Step 7
Step 8
Position arm sofa right side up.
Back Cushion (C)
Align the mounting positions on the Chair Seat(A) .
Insert the Backrest (B) into the Chair Seat (A) as shown in above picture.
Backrest(B)
Right Arm(E)
Chair Seat(A)
Put the Back Cushion(C) on the Right Arm Sofa.
Your Right Arm Sofa is ready for use.
Your Right Arm Sofa can only be used on a flat, level surface.
If you already purchased 2 or more than 2 products, Please
read on
6 of 8
Step 1
Step 2
Step 2.1
Step 2.2
Step 2.3
⑦
⑦
⑦
⑦
Connecting the two sofas by using the pre-fixed Connecting Piece (⑦) as
shown in the picture.
Note: This is optional step in case we want to connect all sofas in a set
together and to match the environment of your home.
Step 2.4
7 of 8
8 of 8
Loading...