Dalton Enterprises, Inc. Product: Latex-ite™ Ice and Snow Melt
Phone: (203) 272-3221 SDS Date: 03/18/2015
SAFETY DATA SHEET
Section I – PRODUCT AND COMPANY IDENTIFICATION n
Product Name: Latexite® Ice and Snow Melt
Manufacturer Name: Dalton Enterprises, Inc.
Item #: 12967 (40lb Box) UPC #: 0 90932 12967 2
12987 (30lb Pail) UPC #: 090932 12987 0
Address: 131 Willow Street Cheshire, CT 06410
Telephone Number: (203) 272-3221
24 Hour Emergency Number: (203) 272-3221
U.S. And Canada: (203) 272-3221
Trade Names and Synonyms: Ice Melt
Recommended Use and Restrictions: de-icing
Effective Date: 03/18/2015
Date Superseded: 10/05/2014
Section II – HAZARDS IDENTIFICATION n
Classification
Physical: Non-Hazardous
Health: Non-Hazardous
Environmental: Non-Hazardous
Label Elements
None Required
Other Hazards
None
Section III – COMPOSITION n
Page 1 of 5 ICE AND SNOW MELT
Dalton Enterprises, Inc. Product: Latex-ite™ Ice and Snow Melt
Phone: (203) 272-3221 SDS Date: 03/18/2015
Section IV – FIRST-AID MEASURES n
Emergency and First Aid Procedures
Eye Contact: Flush thoroughly with water. If irritation persists, see a physician.
Skin Contact: Clean exposed area thoroughly with soap and water. If irritation persists see a physician.
Ingestion: If swallowed do NOT induce vomiting. Rinse mouth and give one glass of water. Seek medical
attention if symptoms develop.
Inhalation: Move to fresh air if symptoms develop. If irritation persists see a physician.
Most Important Symptoms: Possibility of minor eye and respiratory tract irritation.
Indication of Immediate Medical Attention and Special Treatment Needed: Not required
Section V –FIRE-FIGHING MEASURES n
Suitable Extinguishing Media: Water/ Foam
Unsuitable Extinguishing Media: N/A
Specific Hazards Arising From the Chemical: Thermal decomposition may yield but not limited to
chlorine gas and hydrogen chloride.
Special Protective Equipment and Precautions for Firefighters: Wear full protective clothing,
including self-contained breathing apparatus (Positive Pressure/Pressure Demand), helmet, and face mask.
Section VI – ACCIDENTAL RELEASE MEASURES n
Personal Precautions, Protective Equipment and Emergency Procedures: Avoid skin and eye contact,
use proper protective equipment.
Methods and Materials for Containment and Cleanup: Sweep up and wash down with water, dispose
of in accordance with local regulations.
Section VII – HANDLING AND STORAGE n
Precautions for Safe Handling: Store in a dry area, avoid eye contact and wash thoroughly after handling
Conditions for Safe Storage, Including Incompatibilities: Store in a cool dry place with adequate
ventilation. May be corrosive to metals
Section VIII – EXPOSURE CONTROL/PERSONAL PROTECTION n
Exposure Guidelines
Page 2 of 5 ICE AND SNOW MELT