LA STEELCRAFT WMER4 User Manual
STEELCRAFT PRODUCTS
P.O. Box 90365 - Pasadena, CA 91103
PHN 626-798-7401 FAX 626-798-1482
NOTE: NUMBER OF BRACES VARIES BY MODEL OF BACKBOARD
F
D
WALL MOUNT FOR
RECTANGLE BACKBOARD
WMER
MODEL EXT. LENGTH
WMER1 1'-0"
WMER3 3'-0"
WMER4 4'-0"
WMER6 6'-0"
MODEL
B
E
C
PART LIST:
( 2 EA.) CHANNEL: 3" X 1" X 1" STEEL FORMED CHANNEL, 36" LONG/ 11 GA.A.
(TOP CHANNEL HAS (2) TABS WELDED TO TOP)
B. (2 EA.) 1" DIA. ROD X 22" LONG
C. (1 EA.) 3/16" X 6" X 6" STEEL PLATE
D. (1 EA.) 2-3/8" OD STEEL TUBING
E. (1 EA.) 2-3/8" OD STEEL TUBING
F. BRACES: 1" OD GALV. STEEL PIPE X 14-5/8" C.L.(QTY. VARIES BY MODEL OF BACKBOARD)
G. (4 EA.) 5/16" X 1-1/4" HEX BOLTS W/ N, FW & LW (FOR BRACES)
H. (4 EA) 3/8" X 2" (FOR STD. FIBERGLASS BOARD) OR 3/8" X 1-3/4" (FOR ALUM. BOARD)
HEX BOLTS W/ N, FW, & LW (FOR GOAL RIM).
A
I. (1 EA) GOAL RIM & NET UNIT
NOTE: SPECIFICATIONS ARE SUBJECT TO CHANGE
DO NOT SCALE DRAWING
DATE: 9/16/09
DRAWN BY: AFS
STEELCRAFT PRODUCTS
MODEL
P.O. Box 90365 - Pasadena, CA 91103
PHN 626-798-7401 FAX 626-798-1482
WALL MOUNT BACKBOARD INSTALLATION:
Attach extension frame to surface with hardware (Provided By Others).1.
Attach backboard w/goal rim net unit to 3/16" X 6" X 6" steel plate welded on end of 2.
extension frame, using 5/16" X 1-3/4" or 1-1/4" hex bolts w/ N, FW, & LW (item I)
Hand tighten only.
Attach braces to extension frame w/ the 5/16" X 1" bolts w/ N, FW, & LW, hand tighten3.
only. Attach other ends of braces to backborad using the 5/16" X 1" bolts w/ N, FW & LW
Square up backboard unit, then tighten all bolts.4.
WALL MOUNT
INSTALLATION
- WARNING IT IS RECOMMENDED THAT A LICENSED CONTRACTOR BE CONSULTED BEFORE ATTEMPTING
INSTALLATION OF WALL MOUNT EXTENSION SYSTEM.
FAILURE TO INSTALL THE WALL MOUNT SECURELY COULD RESULT IN SERIOUS PHYSICAL
AND PERSONAL INJURY.
DO NOT SCALE DRAWING
DATE: 8/02/05 DRAWN BY: AFS
Loading...