LA STEELCRAFT WMEF1 User Manual
STEELCRAFT PRODUCTS
P.O. Box 90365 - Pasadena, CA 91109
PHN 626-798-7401 FAX 626-798-1482
NOTE: NUMBER OF BRACES VARIES BY MODEL OF BACKBOARD
F
D
WALL MOUNT FOR
FAN SHAPED BACKBOARD
WMEF
MO DEL EXT . LENG TH
WMEF1 1'-0"
WMEF3 3'-0"
WMEF4 4'-0"
WMEF6 6'-0"
MODEL
B
C
PART LIST:
( 2 EA.) CHANNEL: 3" X 1" X 1" STEEL FORMED CHANNEL, 36" LONG/ 11 GA.A.
(TOP CHANNEL HAS (2) TABS WELDED TO TOP)
B. (2 EA.) 1" DIA. ROD X 22" LONG
C. (1 EA.) 3/16" X 6" X 6" STEEL PLATE
D. (1 EA.) 2-3/8" OD STEEL TUBING
E. (1 EA.) 2-3/8" OD STEEL TUBING
F. (2 EA.) BRACES: 1" OD GALV. STEEL PIPE X 14-5/8" C.L.
G. (4 EA.) 5/16" X 1-1/4" HEX BOLTS W/ N, FW & LW (FOR BRACES)
H. (8 EA.) 5/16" KWIK BOLTS, LAG ANCHORS OR TOGGLE BOLTS DEPENDING ON WHAT
KIND OF WALL IS USED.
(4 EA) 3/8" X 2" (FOR STD. FIBERGLASS BOARD) OR 3/8" X 1-3/4" (FOR ALUM. BOARD)I.
HEX BOLTS W/ N, FW, & LW (FOR GOAL RIM).
E
A
J. (1 EA) GOAL RIM & NET UNIT
NOTE: SPECIFICATIONS ARE SUBJECT TO CHANGE
DO NOT SCALE DRAWING
DATE: 7/8/09
DRAWN BY: AFS
STEELCRAFT PRODUCTS
MODEL
P.O. Box 90365 - Pasadena, CA 91103
PHN 626-798-7401 FAX 626-798-1482
WALL MOUNT BACKBOARD INSTALLATION:
Attach extension frame to surface with (8 EA) 5/16" bolts (item H).1.
Attach backboard w/goal rim net unit to 3/16" X 6" X 6" steel plate welded on end of 2.
extension frame, using 5/16" X 1-3/4" or 1-1/4" hex bolts w/ N, FW, & LW (item I)
Hand tighten only.
Attach braces to extension frame w/ the 5/16" X 1" bolts w/ N, FW, & LW, hand tighten3.
only. Attach other ends of braces to backborad using the 5/16" X 1" bolts w/ N, FW & LW
Square up backboard unit, then tighten all bolts.4.
WALL MOUNT
INSTALLATION
DO NOT SCALE DRAWING
DATE: 8/02/05 DRAWN BY: AFS
Loading...