LA STEELCRAFT EC60 User Manual

12" - 14 gauge spun aluminum ball
gold anodized

Double sheave truck, cast aluminum
revolving, non-fouling type

3 Bronze swivel snap with covers
per halyard

1 Set of halyards: #10 poly

Model EC60

Exposed height: 60'-0"

Tapered portion: 53'-4"

1 - 9" Cast aluminum cleats

Aluminum flash collar

3000 PSI concrete

Hardwood wedges
(supplied by others)

Dry sand tightly tamped
after aligning pole

Foundation sleeve -16 ga
hot dip galvanized steel

Steel centering wedges

1/4" Steel base plate

1/4" Steel support plate
welded to grounding spike

12"

Overall length: 66'-0"

Cleat height: 5'-0"

6'-0"

Straight portion: 12'-8"

Foundation: 6'-10"

10"

14"

Truck Detail

Revolving, non-fouling truck
Cast aluminum body
Stainless steel ball bearings
Nylon sheaves
Cast aluminum spindle

All shafts with overall
length of more than
38'-6" are shipped in
two sections.

Each section matched marked
for field assembly. Exposed
portion of jam sleeve must
be well lubricated prior to
assembly.

1-1/2" maximum shop
gap allowed for field fitting
(ram for tight joint)

Project:
Location:
Architect:
Contractor
Customer:

24"

72"

Ground set tapered aluminum flagpole: ALLOY: 6063T6

Exposed height: 60'-0"
Ship in 3
Top diameter: 4"

Finish:

sections

100 grit polish

Overall height: 66'-0"
Butt diameter: 12"
Wall thickness: .250"

Date:
Revision:

Job: