LA STEELCRAFT EC45 User Manual

8" - 14 gauge spun aluminum ball
gold anodized

Single sheave truck, cast aluminum
revolving, non-fouling type

2 Bronze swivel snaps with covers
per halyard

1 Set of halyard: #10 poly

Model EC45

Exposed height: 45'-0"

Tapered portion: 32'-2"

1 - 9" Cast aluminum cleat

Aluminum flash collar

3000 PSI concrete

Hardwood wedges
(supplied by others)

Dry sand tightly tamped
after aligning pole

Foundation sleeve -16 ga
hot dip galvanized steel

Steel centering wedges

1/4" Steel base plate

1/4" Steel support plate
welded to grounding spike

9"

Overall length: 49'-0"

Cleat height: 5'-0"

4'-0"

Straight portion: 16-10"

Foundation: 4'-6"

6"

12"

Truck Detail

Aluminum body
Stainless steel ball bearings
Aluminum sheave
Cast aluminum spindle

All shafts with overall
length of more than
38'-6" are shipped in
two sections.

Each section matched marked
for field assembly. Exposed
portion of jam sleeve must
be well lubricated prior to
assembly.

1-1/2" maximum shop
gap allowed for field fitting
(ram for tight joint)

Project:
Location:
Architect:
Contractor
Customer:

18"

48"

Ground set tapered aluminum flagpole: ALLOY: 6063T6
Exposed height: 45'-0"
Ship in 2

Top diameter: 3-1/2"

Finish: 100

sections

grit polish

Overall height: 49'-0"
Butt diameter: 8"
Wall thickness: .188"

Date:
Revision:

Job: