Laser Pegs 9025 Fire Dragon, FIRE DRAGON 9025 Instructions Manual
WARNING:
Connecting Pegs
FIRE DRAGON--Born in lava, this gargantuan reptile is able to spew great, aming blasts.
Please read manual before you begin! Failure to
9025
EXPERIENCE SERIES
MYTHOLOGY
For Boys And Girls
Ages 5 And Up
16 Models+
Any creation you can build
LIGHTED
CONSTRUCTION SET INCLUDES:
• 20 Laser Pegs®
• 80 Construction Parts
• Triangle Power Base
• Instruction Manual
Requires 3 AA Batteries
Batteries NOT
Included
follow this manual’s instructions may result in
damage to the Triangle Power Base, AC adapter
and/or Laser Pegs®. Not adhering to these
directions will void the manufacturer’s warranty.
Packing has to be kept since it contains
important information.
CHOKING HAZARD-Small parts.
Not for children under 3 yrs.
Do not submerge in water.
Construction Compatible
Compatible with other construction kits
EN71, RoHS COMPLIANT
This product complies to
all safety requirements
of ASTM F 963
MODEL INSTRUCTIONS
All additional model instructions can
be downloaded at www.LaserPegs.com
x2
Y PEG
x4
90° PEG
Color
Code
Laser Pegs® Stackable
Laser Pegs
allows you to connect to
other construction kits.
x2
x2
x1
x2
Laser Pegs® Parts List
There is No LED In The 90 Degree Peg
SQUARE
PEG
x1
x4
45° PEG
Each Laser Peg® is color coded on the circuit board inside
each shape. There is No LED In The 90 Degree Peg.
®
link that
x1
SQUARE
M-M PEGG
Triangle Power
Base
STRAIGHT
T-PEG
x2
TRUSS PEG
TRIDENT PEG
Construction Parts List
x2
x2
x2
x4
x1
x2
x2
x2
x2
x4
x4
x2
x2
x4
x2
x8
x8
x2
x4
x2
STACKABLE
x1
WHEEL PEG
Laser Pegs®
Peg Cord
x2
x4
x4
x2
x1
x4
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures
LLC. 8304 Consumer Ct., Sarasota FL 34240. Contact: Support@LaserPegs.com
To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and o smoothly. To build away from the
Triangle Power Base, use the peg cord in one of the top three peg holes to
illuminate your model! The 90° pegs are essential to construction but they
DO NOT ILLUMINATE.
Press button
Power Button
Peg Holes
to turn on/o
Push button to cycle
through 3 dierent
light settings.
AC Adapter
Connection
Connect Laser Pegs® TRIANGLE POWER BASE
Connect cord to model.
To build away from the Laser Pegs®
Triangle power base use the peg
cord in one of the top three holes to
illuminate your model!
When you remove a peg from another
peg or model DO NOT PULL ON CORD!
When Using Batteries
1. Remove screws.
2. Place three AA batteries in the correct
position - as displayed inside the Triangle
Power Base.
3. Push RED button to turn on!
4. Do not mix old and new batteries.
5. Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel-cadmium)
batteries!
6. Exhausted batteries are to be removed
from the power base.
7. Never connect more than 200 Laser Pegs®
8. Non-rechargeable batteries are not to be
recharged.
9. Rechargeable batteries are only to be
charged under adult supervision.
10. Rechargeable batteries are to be removed
from the toy before being charged.
11. Batteries are to be inserted with the
correct polarity.
12. The supply terminals are not to be short circuited.
Using an
AC Adapt
Remove all batteries
from Laser Pegs® power
base before using the
5 volt AC adapter.
*To avoid short-circuits, keep metal objects and
other un-authorized materials from obstructing
the peg holes.
The AC adapter used with the power base are to be regularly examined for
damage to the cord, plug, enclosure and other parts, and in the event of such
damage, they must not be used until the damage has been repaired.
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs®
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...
1. Use a 5 volt AC Adapter –available from www.LaserPegs.com
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
er
Remove the three Philips head
screws with a 4mm screw driver.
Requires (3AA) Batteries
When using an AC
Adapter, NEVER
place the adapter
plug into the Triangle Power Base
top peg holes.
Never connect more than 200
Laser Pegs® when using a 5 volt
(2000mA) AC Adapter.
FIRE DRAGON
Model
Diculty
Level
A
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
STEP
7
STEP
8
STEP
9
STEP
10
B
STEP
12
STEP
14
STEP
11
C
STEP
15
STEP
13
www.LaserPegs.com
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
Loading...